Enum bytes::BigEndian

pub enum BigEndian {}

Defines big-endian serialization.

Note that this type has no value constructor. It is used purely at the type level.

Examples

Write and read u32 numbers in big endian order:

use byteorder::{ByteOrder, BigEndian};

let mut buf = [0; 4];
BigEndian::write_u32(&mut buf, 1_000_000);
assert_eq!(1_000_000, BigEndian::read_u32(&buf));

Trait Implementations

impl Clone for BigEndian

fn clone(&self) -> BigEndian

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for BigEndian

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl PartialOrd<BigEndian> for BigEndian

fn partial_cmp(&self, other: &BigEndian) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl Copy for BigEndian

impl Ord for BigEndian

fn cmp(&self, other: &BigEndian) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

impl Default for BigEndian

fn default() -> BigEndian

Returns the "default value" for a type.

impl Hash for BigEndian

fn hash<__H>(&self, state: &mut __H) where     __H: Hasher,

Feeds this value into the given [Hasher].

fn hash_slice<H>(data: &[Self], state: &mut H) where     H: Hasher,

Feeds a slice of this type into the given [Hasher].

impl ByteOrder for BigEndian

fn read_u16(buf: &[u8]) -> u16

Reads an unsigned 16 bit integer from buf.

fn read_u32(buf: &[u8]) -> u32

Reads an unsigned 32 bit integer from buf.

fn read_u64(buf: &[u8]) -> u64

Reads an unsigned 64 bit integer from buf.

fn read_uint(buf: &[u8], nbytes: usize) -> u64

Reads an unsigned n-bytes integer from buf.

fn write_u16(buf: &mut [u8], n: u16)

Writes an unsigned 16 bit integer n to buf.

fn write_u32(buf: &mut [u8], n: u32)

Writes an unsigned 32 bit integer n to buf.

fn write_u64(buf: &mut [u8], n: u64)

Writes an unsigned 64 bit integer n to buf.

fn write_uint(buf: &mut [u8], n: u64, nbytes: usize)

Writes an unsigned integer n to buf using only nbytes.

fn read_u16_into(src: &[u8], dst: &mut [u16])

Reads unsigned 16 bit integers from src into dst.

fn read_u32_into(src: &[u8], dst: &mut [u32])

Reads unsigned 32 bit integers from src into dst.

fn read_u64_into(src: &[u8], dst: &mut [u64])

Reads unsigned 64 bit integers from src into dst.

fn write_u16_into(src: &[u16], dst: &mut [u8])

Writes unsigned 16 bit integers from src into dst.

fn write_u32_into(src: &[u32], dst: &mut [u8])

Writes unsigned 32 bit integers from src into dst.

fn write_u64_into(src: &[u64], dst: &mut [u8])

Writes unsigned 64 bit integers from src into dst.

fn from_slice_u16(numbers: &mut [u16])

Converts the given slice of unsigned 16 bit integers to a particular endianness.

fn from_slice_u32(numbers: &mut [u32])

Converts the given slice of unsigned 32 bit integers to a particular endianness.

fn from_slice_u64(numbers: &mut [u64])

Converts the given slice of unsigned 64 bit integers to a particular endianness.

fn from_slice_f32(numbers: &mut [f32])

Converts the given slice of IEEE754 single-precision (4 bytes) floating point numbers to a particular endianness.

fn from_slice_f64(numbers: &mut [f64])

Converts the given slice of IEEE754 double-precision (8 bytes) floating point numbers to a particular endianness.

fn read_u24(buf: &[u8]) -> u32

Reads an unsigned 24 bit integer from buf, stored in u32.

fn read_u48(buf: &[u8]) -> u64

Reads an unsigned 48 bit integer from buf, stored in u64.

fn write_u24(buf: &mut [u8], n: u32)

Writes an unsigned 24 bit integer n to buf, stored in u32.

fn write_u48(buf: &mut [u8], n: u64)

Writes an unsigned 48 bit integer n to buf, stored in u64.

fn read_i16(buf: &[u8]) -> i16

Reads a signed 16 bit integer from buf.

fn read_i24(buf: &[u8]) -> i32

Reads a signed 24 bit integer from buf, stored in i32.

fn read_i32(buf: &[u8]) -> i32

Reads a signed 32 bit integer from buf.

fn read_i48(buf: &[u8]) -> i64

Reads a signed 48 bit integer from buf, stored in i64.

fn read_i64(buf: &[u8]) -> i64

Reads a signed 64 bit integer from buf.

fn read_int(buf: &[u8], nbytes: usize) -> i64

Reads a signed n-bytes integer from buf.

fn read_f32(buf: &[u8]) -> f32

Reads a IEEE754 single-precision (4 bytes) floating point number.

fn read_f64(buf: &[u8]) -> f64

Reads a IEEE754 double-precision (8 bytes) floating point number.

fn write_i16(buf: &mut [u8], n: i16)

Writes a signed 16 bit integer n to buf.

fn write_i24(buf: &mut [u8], n: i32)

Writes a signed 24 bit integer n to buf, stored in i32.

fn write_i32(buf: &mut [u8], n: i32)

Writes a signed 32 bit integer n to buf.

fn write_i48(buf: &mut [u8], n: i64)

Writes a signed 48 bit integer n to buf, stored in i64.

fn write_i64(buf: &mut [u8], n: i64)

Writes a signed 64 bit integer n to buf.

fn write_int(buf: &mut [u8], n: i64, nbytes: usize)

Writes a signed integer n to buf using only nbytes.

fn write_f32(buf: &mut [u8], n: f32)

Writes a IEEE754 single-precision (4 bytes) floating point number.

fn write_f64(buf: &mut [u8], n: f64)

Writes a IEEE754 double-precision (8 bytes) floating point number.

fn read_i16_into(src: &[u8], dst: &mut [i16])

Reads signed 16 bit integers from src to dst.

fn read_i32_into(src: &[u8], dst: &mut [i32])

Reads signed 32 bit integers from src into dst.

fn read_i64_into(src: &[u8], dst: &mut [i64])

Reads signed 64 bit integers from src into dst.

fn read_f32_into_unchecked(src: &[u8], dst: &mut [f32])

Reads IEEE754 single-precision (4 bytes) floating point numbers from src into dst.

fn read_f64_into_unchecked(src: &[u8], dst: &mut [f64])

Reads IEEE754 single-precision (4 bytes) floating point numbers from src into dst.

fn write_i16_into(src: &[i16], dst: &mut [u8])

Writes signed 16 bit integers from src into dst.

fn write_i32_into(src: &[i32], dst: &mut [u8])

Writes signed 32 bit integers from src into dst.

fn write_i64_into(src: &[i64], dst: &mut [u8])

Writes signed 64 bit integers from src into dst.

fn write_f32_into(src: &[f32], dst: &mut [u8])

Writes IEEE754 single-precision (4 bytes) floating point numbers from src into dst.

fn write_f64_into(src: &[f64], dst: &mut [u8])

Writes IEEE754 double-precision (8 bytes) floating point numbers from src into dst.

fn from_slice_i16(src: &mut [i16])

Converts the given slice of signed 16 bit integers to a particular endianness.

fn from_slice_i32(src: &mut [i32])

Converts the given slice of signed 32 bit integers to a particular endianness.

fn from_slice_i64(src: &mut [i64])

Converts the given slice of signed 64 bit integers to a particular endianness.

impl Eq for BigEndian

impl PartialEq<BigEndian> for BigEndian

fn eq(&self, other: &BigEndian) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.